FLUX Newsletter

Beambox is the smartest desktop laser cutter & engraver made for your ideas. Equipped with the powerful CO2 laser, Beambox can cut and engrave on organic materials and even engrave on selected metal. With its revolutionary design and intuitive user interface, you’re just steps away from the fun of making amazing things.

The biggest difference is the laser. Beambox uses a 40-watt laser and can cut up to 10mm, while Beambox Pro uses a 50-watt laser and cuts up to 12mm. The size of Beambox Pro is relatively bigger.

Beambox supports files that you’re familiar with, such as JPG, PNG, SVG, DXF, AI and PDF, and our software is very easy to use, with the tutorial provided, you will be making things in no time!

You can easily find answers to the most common questions on our Help Center, which we update regularly. You can also contact our customer support online and our support team will be more than happy to help you.

We provide a 12 month warranty for Beambox, and 3 month for the laser tube. If you’ve encountered an issue, please contact our technical staff, and our staff will determine the suitable fix. Parts and tutorials will be provided if needed, shipping will be charged.

To find out about shipping, go to your shopping cart and select your country from the drop-down list.

The recipient of an international shipment may be subject to import taxes, customs duties and fees which are levied once a shipment reaches the recipient's country. Additional charges for customs clearance must be fulfilled by the recipient. Customs clearance procedures may cause delays beyond our original delivery estimates.

Beambox is equipped with a CO2 laser tube operating at 10,640 nm averages 40W for Compact, and 50W for the Pro.

BeamBox can cut and engrave on wood, leather, cardboard, acrylic, rubber, foods and more, the maximum cutting thickness is 10mm (varies by materials) for Compact. The Pro model can cut up to 12mm (varies by materials). Beambox can also engrave on anodized aluminum and stainless steel, but the power levels are not enough to cut.

In fact, you can. The maximum cutting thickness stated in the specs are referred to a single cut with an average speed. If you slow down the speed or re-do the cut, you can cut deeper. For example, the maximum cutting thickness for acrylic is 5mm, you can cut 10mm or deeper if you slow down the speed or re-cut several times.

Almost, the camera will miss the upper margin by 1cm. Please see the specs for the dimensions.

Beambox is designed with various safety measures, such as smart lid detection and emergency power switch. Nevertheless, it is required that you never leave Beambox unattended while operating.

The power levels are not enough to cut, but it can etch on anodized aluminum and stainless steel with the use of our specialized coating.

You can engrave on stainless steel with Beambox only when it is coated with our specialized coating. Before you start, cover the material first with the coating for lasting results.

Beambox is equipped with an air pump and a powerful exhaust. The air pump prevents the material from catching fire while the exhaust extracts smoke and fumes.

The work area is 15.7” x 14.7” x 3.1“ (40 x 37.5 x 8 cm) / 23.6” x 14.7” x 3.1 (60 x 37.5 x 8 cm) There’s a honeycomb structure tray for materials that are up to 3 cm (1.18”) thick. The tray can be adjusted manually or removed to accommodate materials up to 8 cm (3.15”) thick.

The laser creates smoke and fumes when operating, we advise you pick a well-ventilated location and use the included exhaust hose for outdoor venting.

To ensure the quality of the laser engraving or cutting, you should check and clean the lenses and mirrors regularly. Usually once every week, but it depends on your usage and frequency.. Lubricate the rails and check the water level of the cooling tank regularly.

For general usage, the laser tube lasts 6 months to 1 year, The lenses and mirrors lasts 1 year or more under regular maintenance. If replacement is necessary, you can refer to our tutorial to change the parts on your own. We’re still working on the pricing and we will update them as soon as possible.

Yes, it is totally free. You’re more than welcome to download it even before receiving your Beambox. We’d love to hear your feedback!

Beam Studio is compatible with JPG, PNG, SVG, and DXF.

You can start, pause and stop task, control, and monitor the status of your Beambox all with a touch of the finger with the touch panel.

If you import the files to Beam Studio first, the files will be uploaded to Beambox before starting the task, so you can disconnect your computer from Beambox anytime. You can also import the files to Beambox directly using USB or choose from the recent task list on the touch panel.

You can connect via Wi-Fi or Ethernet.

Beam Studio is compatible with Windows, macOS and Linux.